Inspection Checklist Excel

Consult NFPA 664 for definitions and specific details.,,,,,,,,, ,,,,,,,,,, ,NFPA 664 ,,,,,,,,,, ,ANSWER ALL - Do ANY of the following exist ,,,,17,Overall response is:,100 ,,When ,Who ,17,500 ,, ,,,,,,,,,, ,1,"HOT WORK - Is Hot Work controlled according to NFPA 51B (Also consult 29 CFR 1910.276 - Welding, Cutting, Burning)",,,,N,0 ,HOT WORK must be controlled, N/A,,N,0 ,, ,3.7.1,,,,,, N/A, N/A,,,, ,,,,, N/A, N/A, N/A, N/A,, N/A, N/A,, ,1,ELECTRICAL SYSTEMS - Do electrical systems meet NFPA 70 (Also see OSHA 29 CFR 1910.303 and the following),,,,N,0 ,ELECTRICAL SYSTEMS must meet code requirements-SEE NFPA 70, N/A,,Y,100 ,, ,3.7.2,,,,,, N/A, N/A,,,, ,,,,, N/A, N/A, N/A, N/A,, N/A, N/A,, ,1,HOT SURFACES - Are exterior surfaces of heated process equipment in contact with wood prevented from a MAXIMUM allowable temperature of 500 degrees (500 F) 260 C ,,,,N,0 ,Wood exposed to HOT SURFACES exceeding the auto-ignition temperature of wood at 399 degrees may ignite,FIX,,N,0 ,, ,3.7.3,,,,,, N/A, N/A,,,, ,,,,,,,,,, ,,,,,,,,,, ,,,,, N/A, N/A, N/A, N/A,, N/A, N/A,, ,1,BEARINGS - Are they monitored for adequate lubrication and excessive wear ,,,,N,0 ,Inadequate lubrication wear leads to frictional heating and auto-ignition of wood dust, N/A,,N,0 ,, ,3.7.4,,,,,, N/A, N/A,,,, ,,,,,,,,,, ,,,,,, N/A, N/A, N/A,, N/A,, ,1,"POWERED INDUSTRIAL TRUCKS - IF they operate in areas with a deflagration hazard, are they the correct classification (See NFPA 505)",,,,N,0 ,Powered Industrial Trucks are sources of ignition-CHECK Classification,FIX,,N,0 ,, ,3.7.5,,,,,, N/A, N/A,,,, ,,,,,, N/A, N/A, N/A,, N/A,, ,1,"LIGHTING - Are they designed, installed, maintained so they aren t an ignition hazard during normal operation OR catastrophic failure ",,,,N,0 ,Evaluate Upgrade lighting to low temperature enclosed devices,