HTML Preview Technical spec sheet example page number 2.
3M
™
High Performance Adhesive Transfer Tapes with Adhesive 200MP
467MP • 468MP • 467MPF • 468MPF • 467MPR • 468MPR • 7952MP • 7955MP
7962MP • 7965MP • 9172MP • 9172PT • 9185MP • 9188 • 9667MP • 9668MP • 9676
- 2 -
1
The adhesive color is transparent with a very slight yellow cast. The yellow cast is not typically visible in a single adhesive
layer.
2
The thickness listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012
g/cc. While past data pages have listed nominal thicknesses of 2 and 5 mils, the coat weight (and theoretical caliper) has
not changed.
3
Where two liners are listed (double-linered products, useful for selective die-cutting), liner 1) is the primary (stays with the
die-cut part); liner 2) is the secondary (removed first). The polycoat on one side of the heavy linered products (83#) was
changed to balance the liner. This balanced sheet will provide an improvement to the flatness of products made using the
heavy liner.
4
Typical liner release value, in grams/inch, tested at 90 ipm.
For additional double coated product constructions (adhesive/carrier/adhesive) using 3M™ Adhesive 200MP, please refer to
the data page for 3M™ Membrane Switch Spacers (70-0707-1195-0) and the data page for Double Coated Tapes with 3M™
Adhesive 200MP (70-0709-3792-8).
Constructions (continued)
Adhesive Adhesive Liner Liner
Product Type/ Thickness
2
Color, Type, Caliper
3
/
Number Color
1
(mils, mm) Print Liner Release
4
3M™ Adhesive Transfer 200MP/ 5.2 mils 1) Tan, 58#, Polycoated Kraft, 1) 4.2 mils
Tape 7955MP Clear (0.13 mm) “3M 200MP” 50 grams/inch
2) Tan, 58# PCK 2) 4.2 mils
12 grams/inch
3M™ Adhesive Transfer 200MP/ 2.3 mils 1) Tan, 83#, Polycoated Kraft, 1) 6.2 mils printed
Tape 7962MP Clear (0.06 mm) “3M 200MP” 50 grams/inch
2) Tan, 58# PCK 2) 4.2 mils
12 grams/inch
3M™ Adhesive Transfer 200MP/ 5.2 mils 1) Tan, 83#, Polycoated Kraft, 1) 6.2 mils printed
Tape 7965MP Clear (0.13 mm) “3M 200MP” 50 grams/inch
2) Tan, 58# PCK 2) 4.2 mils
12 grams/inch
3M™ Adhesive Transfer 200MP/ 2.3 mils 1) Clear HDPE Film, No Print 1) 3.0 mils
Tape 9172MP Clear (0.06 mm) 2) Tan, 58# Polycoated Kraft, 50 grams/inch
No Print 2) 4.2 mils
7 grams/inch
3M™ Adhesive Transfer 200MP/ 2.3 mils 1) Clear PET Film, No Print 1) 2.0 mils
Tape 9172PT Clear (0.06 mm) 2) Tan, 58# Polycoated Kraft, 40 grams/inch
No Print 2) 4.2 mils
7 grams/inch
3M™ Adhesive Transfer 200MP/ 5.2 mils 1) Clear HDPE Film, No Print 1) 3.0 mils
Tape 9185MP Clear (0.13 mm) 2) Tan, 58# Polycoated Kraft, 70 grams/inch
No Print 2) 4.2 mils
7 grams/inch
3M™ Adhesive Transfer 200MP/ 5.2 mils 1) Clear HDPE Film, No Print 1) 3.0 mils
Tape 9188 Clear (0.1m) 2) Tan, 83# Polycoated Kraft, 50 grams/inch
No Print 2) 6.2 mils
20 grams/inch
3M™ Adhesive Transfer 200MP/ 2.3 mils Tan, 83#, Polycoated Kraft 6.2 mils
Tape 9667MP Clear (0.06 mm) “3M 200MP” 60 grams/inch
3M™ Adhesive Transfer 200MP/ 5.2 mils Tan, 83#, Polycoated Kraft 6.2 mils
Tape 9668MP Clear (0.13 mm) “3M 200MP” 70 grams/inch
3M™ Adhesive Transfer 200MP/ 2.3 mils 1) White Polypropylene (PP), 1) 3.5 mils
Tape 9676 Clear (0.06 mm) No Print 45 grams/inch
2) Tan, 58# Polycoated Kraft, 2) 4.2 mils
No Print 20 grams/inch